Category: DIY

Do It Yourself water solutions

Top 7 Mistakes to Avoid when Harvesting Rain Water

  1. To expensive, don’t worry about it. Cost effective solutions are available. Start somewhere.
  2. fish, lids or screening to keep bugs away from your water
  3. Don’t overly choke your flow.
  4. Reuse old pools, hot tubs, or other methods to create more storage.
  5. Don’t ignore the power of natural elevations
  6. Don’t allow algae to overcome your water, black painted rain barrels won’t allow photosynthesis.

7. Don’t neglect harvesting rain water.

This information was all acquired from the following video.

The biggest mistake you can make when harvesting rain water is to not try at all. Rain water is a fantastic resource for your home and garden.

Even if you make a lot of mistakes, if you are learning and working towards your goals, your on the right path.

If you have any other tips or guides for harvesting rain water, please do share at the comments below.

Thank you,

and have a wonderful day

sincerely

Joseph

1 Comment

Categories: DIY Opportunities solutions Water

Bringing Clean Water to the World on a Budget

Greetings patrons of this Clean Water Imitative blog.

Today we are continuing our efforts at examining how to most cost effectively bring clean water to as many people as possible. With requests and regular correspondence to a few friends in Kenya and Nigeria among other wonderful nations, the demand for aid is what sometimes feels like endless. With this in mind and with a concern about the security of funding international programs, including the financial demand beyond our current reach, we have looked at other ways to help as broadly as possible.

With this in mind, let’s learn how to make our very own cost effective filters. Using this first video, we can see that using activated charcoal, or activated bio carbons is essentially all we will need to assure we have much cleaner drinking water. In my mind using this method will improve tap water in most if not all major cities around the world.

In the video above we find a simple effective method to keep your drinking water clean, All we need is:

A cutting tool

A drilling tool

A bottle or container

Activated charcoal or activated bio carbons.

Cheese cloth or screen, gauze

Step 1

Rinse the activated charcoal until it runs clear.

Step 2

Cut the bottom off the bottle

Step 3

Make the screen and drill holes in the cap.

Step 4

Put the cap back on and fill the container with the activated charcoal or activated bio carbons.

Step 5

Lastly we need to make a diffuser to distribute the water through the filter more evenly, Optionally you can also use a coffee filter, and you also want to make sure to clean the diffuser and the cap as determined necessary based on usage.

Now let’s look at how to make activated charcoal?

Now that you know how to make activated charcoal, you can sell it, or you can make these filter systems to sell. What a gift to the community this can be.Don’t forget to consider trade as a method of payment from those less financially successful than yourself.

However you maybe looking to build a more permanent filter for a larger volume of use, like at a school perhaps? Check out the video below. By making more layers to the filter, we can help filter the water more.

Ideally unlike in the video above, we rinse our carbon and other filter layers before use.

Check back on the 12th when I publish a blog talking about mistakes to avoid when harvesting rain water.

Thank you for checking out this blog post on Bringing Clean Water to the World on a Budget.

As always it was a pleasure and please share this to anyone who may find it interesting or useful.

Additional options and ideas

https://www.engineeringforchange.org/news/ten-low-cost-ways-to-treat-water/

2 Comments

Categories: DIY Opportunities solutions Water

Building a Well!

In the event you don’t live near a fresh water spring or have the ability to get water from the spring to your home, the next best thing is to get a well! Safer then relying on tap water or infrastructure build by someone else, is to do it yourself. So how difficult can it be to get your own water straight from the ground? Apparently easier than we thought.

Step one and probably the most important step, is to check the local water table. Some regions have water right under the surface of the ground and some areas don’t have water anywhere near the ground level. Discovering this is the most important first step.

Below you will find a few guides that can really show you what digging a well is all about.

Let’s start with a handy man who did an excellent job for under $500 dollars plus time and effort.

Below is a picture and description based guide you can follow talking about the same process.

https://www.wikihow.com/Make-a-Well

& below is another more amateur attempt at hand digging a well. It’s pretty fun too

Looking to build your own well using a kit?

This site has some pretty awesome kit based solutions, it’s also a good resource to build your own from their items list. https://emergencywaterwell.com/

All of this is built off a system of pressurising the water which forces it up against gravity.

Find similar resources of information here from my original website. Great information to have in case of an emergency.

https://josephmcdonald10.wixsite.com/joecompanyconsulting/things-any-provider-should-know

Thank you for your time and interest, and many blessings in securing your very own clean water. Remember to test your water and forecast obstacles.

Blessings.